How To Set Up Wifi To Brother Printer

How to set up Brother printers (Wi-Fi and WPS)

beamian system allows you to impress visitor identification labels at the check-in stage. You can configure our Brother printers that are great and fast when press company labels.

You tin can connect the Blood brother printer to a router via Wi-FI network or via WPS. Side by side, connect your mobile device or famocos to the same network (supported by the router) and open beamian organizer mobile app. And then cull your upshot and configure Printer settings to complete the setup!

How to set upward a Brother printer via Wi-Fi network

Install the Brother QL-810w printer drivers.
When installing the printer drivers, connect the printer's power cablevision to the power supply source and the USB cable to your computer.

power cable and USB cable

During the printer commuter installation procedure, you lot volition exist asked to enter the printer'south serial number. This number tin be found on the label attached to the printer (equally you can see in the image).

brother ql810w printer

Once the drivers are installed, search for Printer Setting Tool on your computer and open it.
Choose Communication settings.
Click General > Communication Settings and confirm the settings are as follows:
- Network Settings on Power On: On by Default.
- Selected Interface: Infrastructure or Ad-hoc.

printer 3

Click Wireless Lan > Wireless Settings > SSID (Network Name) > Search and select your network.
Enter the password in Passphrase field.
And click Apply.

printer 6

Click Wireless Lan > Current Status > Refresh to ostend that the SSID (Network Name) is correct according to the network you lot are connected.
After clicking Utilise, you lot tin disconnect the USB cable from your blood brother machine.

Please annotation: If you want to connect Blood brother printer via Wireless Direct please watch this tutorial.

Later the printers are connected to the network, read our article on setting upward Brother printer to print visitor labels with beamian Organizer mobile App.

How to set a Blood brother printer via WPS (router)

Connect the router's ability cable to the power supply source.
Click ON/OFF button on the router and wait until all of the router'southward panel commands are agile.
Connect the printer's power cable to the power supply source.

power cable

Click the ability push on the printer. A green light volition come on and wait 10 seconds until the next step.
Click the WPS button on your router for three seconds.
Click the printer's WPS push button for three seconds. When the printer light turns blue (it's not a blinking blue light), the printer is connected to the network. It may take a few seconds.

After the printers are continued to the network, read our article on setting upwardly Blood brother printer to print visitor labels with beamian Organizer mobile App.